12V 200AH 300AH LiFePO4 Battery
Technical Parameters
Rated voltage 12V
Rated capacity: 200AH,300AH
Built in BMS / Bluetooth BMS
1. Battery cell type: LiFePO4 battery
2. Weight:
200AH:about 15.5 kg
300AH:about 24 kg
3. Size: 415*340*175 mm(200ah, 300ah are all in this size)
4. Nominal voltage: 12.8V
5. Operating voltage range: 10V~ 14.6V
6. Maximum charging current: 100A
7. Charging voltage: 14.6V
8. Continuous discharge current:
12V 200AH battery≤ 200A(200A BMS)
12V200AH (with Bluetooth BMS) battery≤ 150A(150A BMS)
12V 300AH battery≤ 200A (200A BMS)
12V300AH (with Bluetooth BMS) battery≤ 200A(200A BMS)
9 Instantaneous discharge current: ≤ 360A
10. Service life: more than 3000 cycles
11. Operating environment: 0 ~ 45℃ (charging), -20 ~ 60℃ (discharging)
12. Battery storage period: 90% power (6 months)
13. Battery warranty: 12 months (free warranty)
Interface Introduction
Note: all interfaces can be charged and discharged!
① Charging socket (GX20, 3-pin airhead)
This interface is used by the charger to charge the battery, Its overcurrent is less than 20A.
② Waterproof plug (20A)
③ Anderson plug (120A)
④ ⑤ 10mm terminal (Discharge/charge interface)
Its overcurrent is less than 300A, It is used for loads with power below 3000W.
Suitable for connection with 10 mm diameter copper nose
It can also be used for charging.
⑥ USB charging interface (QC3.0)
This interface can charge mobile phone and other electronic devices, and support QC3.0 fast charging.
⑦ Automobile cigarette lighter socket (female socket)
This socket can supply power to 12V car refrigerator and other car electronic products.
⑧ Battery power and voltage display
Display battery voltage, charge, temperature
Please note:
The percentage of electricity displayed on this display is inaccurate. When using it, you need to estimate the remaining electricity according to the voltage.
1. The power of 12V LiFePO4 battery is concentrated between 12.2v-13.2v. When the voltage is lower than 12V, BMS will soon cut off the battery output.
2. When charging, the indicator light of the charger changes from red to green to indicate full charge.

Including 20A charger
20A charger with European standard or American standard or the British standard or Australia standard plug (according to buyer's national standards).
1. Charging voltage: 14.6V
2. Charging current: 20A
3. Input voltage: 100v-240v
4. Charging time: about 12 hours
NOTE: The red indicator light indicates that the charging is in progress, and the green indicator light indicates that the charging is completed.
Built in BMS
12V 200AH battery built in 200A(200A BMS)
12V200AH (with Bluetooth BMS) battery built in150A Bluetooth BMS
12V 300AH battery built in 200A BMS
12V300AH (with Bluetooth BMS) battery built in 200A Bluetooth BMS
Built-in BMS battery management system, functions:
1. over charge protection. 2. over current protection. 3. over voltage protection
4. discharge protection. 5. short circuit protection. 6. over power protection.
7. temperature protection.
Battery type(Cell Type)
Adopts large single high power LiFePO4 battery. The current output is more stable and stronger.
LiFePO4 battery have higher safety, longer service life and a wider operating temperature range.
Application
Boat propeller battery, Camper/scooter, golf trolley/carts, power tools...
Inverter, Solar and wind power system, RV, caravan...
Back-up system and UPS...
Torch LED light emergency light.
Better service
Contact the seller, know more products information.
Capacity and output interface can be customized.